Product Features and Benefits:
LONG ELEMENT LIFE:
| • |
Patented PTC heater element lasts longer than conventional heaters.
•Will not burn out if run in air.•Will not melt fluoropolymer sheath if run in air.•Will not burn out due to scale or sludge buildup.•Heavy wall fluoropolymer (FEP) covered stainless steel element. Guaranteed 100% pinhole free.
SAFE DESIGN:
| • | Heater self limits its maximum operating temperature to 432° F (222° C). This is lower than the ignition point of most plastics. |
| • | Will not melt tanks when a ½” (12mm) minimum distance is maintained. |
| • | Overtemperature protection devices are not required. |
| • | Safety is built-in, not added on. |
| • | Metal-grounded construction (earth ground). |
| • | Non-floating construction. |
SIZES: 500 watts (.5kW) to 6,000 watts (6kW).
VOLTAGES:
| • |
Heater is not voltage specific. 100 volts to 480 volts produces the same heat output.
•Specific voltage is required for UL labeling and to determine ampere draw of heater. •Heater is field selectable: single or three phase power.
CORROSION RESISTANT JUNCTION BOX:
| • | Sealed Corzan® CPVC terminal enclosure. |
| • | Vapor tight and flame retardant, IP65 rating. |
| • | 80″ (2m) flexible, liquid tight electrical cable (cord). |
| • | Flange can be mounted in one of four different positions. |
OUTSTANDING PERFORMANCE:
| • | Watt densities of 13 watts per square inch (2 watts/cm2) ensure long service life. |
| • | Auto-stabilizing solid state element prevents hot spots and ensures uniform heating. |
| • | Maximum solution temperature 300° F (149° C). |
| • | Heater derates itself in highly viscous and high temperature (over 212° F/100° C) solutions. Consult factory for sizing assistance. |
CHEMICALLY RESISTANT: Inert to most aqueous acid, alkaline, anodizing and pickling solutions.
CERTIFICATIONS:
UL, CSA and CE.
OPTIONS (consult us as addition charges may be involved):
| • |
Longer electrical cable (cord) lengths.
•Extended cold zones.•Polypropylene guards: recommended for applications up to 180° F (82° C).•Fluoropolymer (PTFE) guards: recommended for chromic acid and applications over 180° F (82° C).•Temperature controls and level controls sized to match the heater.
